Baseline-systems BL-PFS400 Flow Sensor Bedienungsanleitung PDF herunterladen

BL-PFS300 & BL-PFS400

Flow Sensor Installation

1-866-294-5847 Rev 03262013 www.baselinesystems.com

Installation Overview

1. Choose the proper location and orientation.

2. Install the sensor in the pipe.

3. Make the electrical connections.

4. Program the controller.

Baseline’s BL-PFS300 and BL-PFS400 are saddle-type, impeller flow sensors that provide

accurate digital output signals proportional to the velocity of the liquid flowing through the

pipe.

Operation Notes

 Make sure the flow sensor is assembled and the retaining nut is tightened (hand tight)

before pressurizing the system.

 Fill the pipeline and eliminate all trapped air.

 The flow sensor should begin transmitting flow immediately; however, it may take up to

a minute for the flow readings to display in the appropriate screens on the BaseStation

controllers.

 Always wait for flow to stabilize before setting control limits. Stabilization may take

several minutes in large piping systems.

1 2 3 4 5

BL-PFS300 & BL-PFS400 Flow Sensor Installation 1-866-294-5847 Rev 03262013 www.baselinesystem

Seite 2

1-866-294-5847 Rev 03262013 www.baselinesystems.com Choosing the Proper Location and Orientation B

Seite 3

1-866-294-5847 Rev 03262013 www.baselinesystems.com Installing the Baseline PFS Flow Sensor in the

Seite 4

1-866-294-5847 Rev 03262013 www.baselinesystems.com Attach the Saddle to the Pipe 2. Place the to

Seite 5

1-866-294-5847 Rev 03262013 www.baselinesystems.com Making the Electrical Connections 1. Power of

Keine Kommentare

Baseline-systems BL-PFS400 Flow Sensor Bedienungsanleitung